List of second hand machinery
Dyeing Sector
* 600 Kg. * One Thies dyeing machine HT 140 °C, model “Soft-Stream V”
- Year of Construction 1989
- 3 channels with 2 ropes per channel, total six ropes, for load capacity of 100 Kg. each rope,
- Total load capacity 600 Kg.
______________________________________________________________________
* 450 Kg. * One Thies dyeing machine HT 140 °C, model “Luft-Roto”
- Year of Construction 1996
- Three ropes for load capacity of 150 Kg. for each rope,
- Total load capacity 450 Kg.
______________________________________________________________________
* 400 Kg. * One Laip dyeing machine HT 140 °C, model “Soft 600”
- Year of Construction 1991
- Four ropes for load capacity of 100 Kg. for each rope,
- Total load capacity 400 Kg.
_____________________________________________________________________
* 200 Kg. * One Laip dyeing machine HT 140 °C, model “Soft 600”
- Year of Construction 1992
- Four ropes for load capacity of 100 Kg. for each rope,
- Total load capacity 200 Kg.
* 800 Kg. * One Brazzoli dyeing machine HT 140 °C, model "HTS JUMBO 4"
- Year of Construction 1987, completely overhauled in 1998,
- new electrical box new controller in 1998
- 8 channels (4 kiers) for load capacity of 100 Kg. each,
- Total load capacity 400 Kg.
Drying Sector
* 5/1900 * Single Layer Stentering Machine, manufacture Babcock Artos YOC 1086, completely overhauled in 1997 by the manufacturer
- working width mms. 1900
- combined pin/clips horizontal return chain
- 5 chambers, gas heated, for total length of oven mms. 15.000
- One Squeezeing Machine completely revised, two bowls, manufacture Artos
- mms. 1800 working width, mms. 2000 rollers width, with dancing roller for automatic speed synchronisation
- One Automatic Weft Straightener, manufacture Mahlo - mms. 1800 working width, mms. 2030 rollers width, with 4 detecting heads, 2 bowed rollers and 3 skew rollers
* 6/2100 * One Brueckner Single Layer Stentering Machine YOC 1989
- working width mms. 2200,
- pin vertical return chain
- 6 chambers, oil heated, for total length of oven mms. 18.000
- the machine is completely equipped with all devices for knitted fabric handling
On demand we can supply:
- Automatic Weft Straightener
- Padding Mangle Machine
- One oil boiler, 2.000.000 K/cal, manufacture Aereomeccanica Colombo,gas burner
- Inspecting and rolling non-stop machine
* 6/2100 * One Brueckner Single Layer Stentering Machine YOC 1987
- working width mms. 2200,
- pin vertical return chain
- 6 chambers, oil heated, for total length of oven mms. 18.000
- the machine is completely equipped with all devices for knitted fabric handling
On demand we can supply:
- Automatic Weft Straightener
- Padding Mangle Machine
- Inspecting and rolling non-stop machine
*3/1800 * One relaxing drying machine Monforts mod. “Dynair”
- Year of construction: 1995
- working width mms. 1800,
3 chambers gas heated, total length of the oven mms. 12.000 - fabric conveyor mesh belt
6/1800 * drying cylinders “Ramallumin”
The line was completely electrically and mechanically overhauled in 1996
- cylinders width mms. 1800,
- two towers with 6 cylinders each, total 12 cylinders steam heated, stainless steel made.
Washing and Finishing
Line of Singeing, manufacure Osthoff, yoc 1986, which consists of:
- Entry frame with adjustable tension bars with non-stop feed system (J-box)
- 1 brushing machine for right and back side of fabric, complete with suction for waste removal
- 1 Singeing machine, manufacture “Osthoff Senge”,
- 1 beating machine, second hand year 1989, for right and back
- 1 desizing tank with 3 bowls “Beta” mangle
- delivery in big batches on A-frames
Open Width Washing Range, manufacture Kusters, yoc 1984, 9 washing tanks
- mms. 1800 rollers width
- 5 soaping and washing tanks model “Rollenkufe”
- 5 squeezers at the exit of all Rollenkufe with pneumatic pressure control
- 4 washing and rinsing tanks, model “Rotojet”, with 2 inside perforated drums
- final squeezer model “Aquatroll”, 3 bowls, with one high efficiency Kusters Swimming Roller
- fabric delivery in big diameter batches
Sperotto, continuous open width solvent washing, model NOVA 200/750, year 1987
- mms. 1800 working width, mms. 2000 rollers width
- machine completely refurbished in 2001
N° 1 Kleinewefers calender, refurbished in 2001
- year of construction 1984
- mms. 2300 working width, mms. 2540 rollers width
- 4 calendering rollers ( two oil heated), 2 chrome plated steel, 1 special plastic covering,
1 cotton paper covering
- max. operation pressure of 60 tons
Anglada - Turbang
Manufacturer : Jaume Anglada Vinas S.A.
Model : TMS – Turbang Multi Strike
year : June 2000
rollers width : 2000 mm.
Useful working width : 1800 mm
Number of chambers : 1
Heating : by gas
Biancalani mod. Airo 1000 (two machines)
Construction year 1994
Gas heated.
Machine suitable to dry the material and for dry treatment..
Anglada - Turbang
Turbang 3 Chambers (2+1) Original Anglada
Construction year 1990
Completely reconditioned in the period December 2005 January 2006
Heating by gas
Balancing of the chambers by loading cells
Feeding by plaits and by roll
Delivery only in plait
The machine can be supplied as double Turbang (two chambers) or only single, since the machines are separated 2+1
Sperotto, continuous decatizing machine, model “Multidecat”, year 1990
- machine completely refurbished in 2004